Heat Proof Car Wrap Roll Metallic Crystal Ceramic Matte Black Bubble Free

Product Name: Metallic Crystal Ceramic Matte Black Bubble Free Heat Proof Car Wrap Roll

Product Description:

• Car wrap film is a process of transforming the color and looks of your car by applying large sheets of pressure-sensitive vinyl film to each individual panel on the car. Carbon fiber vinyl wrap film is applied with extreme precision and skill and can only be carried out by highly trained and specialized staff.
• This black car wrap is made of high-quality material.Waterproof, moisture-proof, durable and non-fading.Different from ordinary style,it shas a matte finish that looks more textured.

Product Features:

1. Excellent conformability around curves and recesses
2. Exceptional durability and performance
3. Even the most experienced applicators are more productive, compared to the standard permanent adhesive.
4. Combines a colored film and protective layer in one convenient construction with fewer seams
5. Available in opaque and textured, special effect, and metallic options

Product Specfications:

Product Application:

1. Trucks
2. Vehicle advertising
3. Trailers
4. Emergency Vehicles

Advantages of Applying Car Wrap Film:

1. Vinyl car wraps wear as well as, or better than paint – when properly cared for. Think of it like a skin for your laptop or a silicon cover for your phone. The vinyl can take a beating protecting the vehicle’s paint underneath.
2. Many of the styles can not be reproduced by paint.
3. Matte-paint jobs can be brittle and chip easily, while vinyl is more durable and harder to scratch. In the event that repairs are needed, the part that was damaged can be easily replaced, providing a perfect match.
4. Adds to the resell value of your car. When you remove it, your paint is in the same condition as on the day it was wrapped. Thus adding to the resale value by having flawless paint on your car. A repainted car normally decreases the value of your vehicle due to concerns over possible previous accident(s).
5. You can restore the car to its original color by removing the wrap.
6. Warranties and/or lease agreements remain valid. Painting can void warranties and is not a lease option.
7. The cost for a vinyl vehicle wrap is considerably less (nearly half) than a comparable paint job.
8. Expensive, color-matching paint fees are unnecessary for scratches or accident vehicles; just re-wrap the section that needs repair.
9. It’s difficult to tell it’s not painted.

FAQs:

• How to remove vinyl from your car?

1.Finally, use Turtle Wax Label & Sticker Remover or Bug & Tar Remover to remove any adhesive residue from the surface of the panel.

2. Use the heat gun to evenly heat the surface of the wrap to about 120 °F (50 °C). This will loosen the adhesive so you can pull it off. Use a non-contact infrared thermometer to confirm you aren’t overheating, which can lead to excessive adhesive residue left on the surface.

3. Use your fingernail or plastic scraper to pull the wrap from the edges of the entire panel. It’s going to look gnarly, but it’ll all be gone in a few minutes.

4.Pull the wrap away from the edges at a steep angle, pulling the wrap back on itself at 15 to 20 degrees. When the wrap gets hard to pull, reheat and start pulling again.

• Will car wrap damage my car’s paint?

Actually, car wrap can protect your paint because it blocks damaging ultraviolet light. When you remove it, the original finish will be intact.

Heat Proof Car Wrap Roll

Matte Black Car Wrap Roll

Polymeric Calendered Vinyl Car Wrap Roll

Heat Proof Car Wrap Roll Metallic Crystal Ceramic Matte Black Bubble Free Images